solar panels unisolar
hey, I'm willing to help our earth a little, and wondered how to make a connection of solar panels for power my house …. i just want to reduce my electricity bill a bit, "These solar panels work? And how I can connect? http://store.altenergystore.com/Solar-Electric-Panels/Roofing-Solar-Panels/Unisolar-PVL- 136T-136W-24V-Thinfilm-Rooflaminate/p4087 / (i live in st. Louis, MO)
General Information The installation of solar modules (panels) requires a high degree of skill and should (if the DC voltage exceeds 100V:) only be performed by a licensed 1. Precautions. Avoid electrical hazards during the installation, wiring, operation and maintenance of the module. 2. A photovoltaic module generates DC electricity when exposed to sunlight or other light sources. 3. When installing or working with the wiring of the module, module cover your face with opaque material to halt the production of electricity. 4. It is recommended that the module remains packed in the carton until time of installation. 5. Do not touch the terminals while the module is exposed to light or during installation. Provide safety devices adequate to prevent contact with 30 V DC or above. As an extra precaution, use only properly insulated tools. 6. Do not drop the module or allow objects to fall into the module. 7. Do not stand or step in the module. 8. Because they can produce sparks, do not install the module where flammable gases or vapors are present. 9. Never leave a module unsupported or unsecured. If a module is dropped, the glass may break. A module with broken glass can not be repaired and should not be used. 10. Work only under dry conditions with dry module and tools. 11.Module installation and operation must be performed by qualified personnel. Children should not be allowed near the solar electric system. 12. If not specified, it is recommended that the requirements of the latest national and regional follow local electrical codes. 13. The use of modules for function only. 14. Do not artificially concentrate sunlight on the module. 15. The word "module" used in this Guide refers to one or more photovoltaic modules (panels). Note 1. All instructions must be read and understood before attempting to install, wire, operate and maintain photovoltaic module. Contact with electrically active parts of the module, such as terminals may cause burns, sparks, and lethal shock if the module is connected or offline. 2. Photovoltaic modules produce electricity when sunlight or other sources to illuminate the front face. The voltage of one module is not considered a risk electric shock. When modules are connected in series, voltages are additive. When modules are connected in parallel, the current is additive. In Consequently, a multi-module system can produce high voltages and currents that are a greater danger.
How to Install Laminate Solar Panels (Unisolar)
