solar cell degradation
Solar Reliance Group has been successful in obtaining certification of its photovoltaic (PV) modules TÜV Rheinland Japan Ltd. His photovoltaic modules have benefited from the IEC 61215 and safety certification has been tested to be certified to IEC 61730. The test modules are RS120, RS125, RS130, RS160, RS165, RS170, RS175, RS180, RS185, RS190, RS195, RS200, RS205, RS210, RS215, RS220, RS24250, RS24255 and RS24260. There are two important aspects of testing. First, the selected samples are tested for compliance with relevant standards and requirements in the accredited laboratory of TÜV Rheinland Japan Ltd. Then quality control and regular testing of production are carried out by TÜV experts in the manufacturing sites. These tests and certifications have confirmed the reliability of products offered by the Reliance Group.
The RS170 and RS125 Wp Wp has earned certification as they are high in efficiency due to the use of cells high efficiency, acid texture of solar cells, thin grid lines of silver, again completely covered the surface of the field along with the picture AND DIMENSIONS Optimized anti-glare coating on the cells. On one side B of texture, tempered glass increases light absorption and efficiency. The RS170 Wp and the Wp RS125 has a tight power tolerance ± 3%. They are very reliable since they have a maximum system voltage of 1000V, a corrosion-resistant frame, a lower slope of the module frame, proven glass / EVA / backsheet encapsulation technology, three layered backsheet, a polyurethane film double-face to set the framework, a highly resistant structure of the structure and a universal framework that can be mounted anywhere. The GT RS170 and RS125 ensures the Wp security as they have a weather proof box bounced union with clips, bypass diodes high reliability, a locking mechanism fitted connectors and high current Insulated cables rated.
TÜV Rheinland Japan Ltd. conducts tests to assess whether an organization is meeting the requirements specified by the corresponding standard and issues of production facilities at regular intervals to ensure that certified products correspond to samples tested and remain worthy of certification. The IEC certification of products offered by the Reliance group solar is recognized by a large number of countries around the world and also ensures that the buyer can trust in product quality.
The IEC 61215: a qualifying examination has been conducted in all the parameters that may be responsible for aging of the modules photovoltaics. The photovoltaic modules are tested with artificial loads, such as sunlight including UV rays, climate change and mechanical loads of hail, wind and the suction pressure of wind. PV modules pass the tests, if after the introduction of charges visual defects are not detected and the output power has not or slightly degraded from its initial value. The IEC 61215 qualification certificate by TUV Rheinland Japan Ltd. has gained acceptance as a benchmark of quality for crystal of the IEC 61730 standard means that the photovoltaic module has been tested for safety and has called it. The tests to assess whether the design of the modules PV is such that the electrical and mechanical operation ensures safety throughout the lifetime of the device. The test sequences are designed IEC 61730 to correspond to the tests conducted for the design qualification and type approval according to IEC 61215. The tests were carried out in different categories, security, such as risk of electric shock, mechanical stress, environmental stress and the general inspection. Besides the basic tests, tests Additional conducted according to the final application of photovoltaic modules that are classified into classes A, B and C. Certification is granted when the evidence be deemed approved on the basis that there is no possibility of electric shock, fire and personal injury. The IEC 61730 consists of tests that are part of the safety rating of Class II.
